Loading ...
Loading ...
Loading ...
English
Operations
English46
Alarm
You can turn on or off the sound from the washing machine. When this function is set to Off, the AddWash
alarm, the melody of cycle completion, and the power-off beep does not sound. However, the other sounds
stay active.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Alarm, and then tap .
3. Tap to select On or Off.
- The default setting is On.
NOTE
• The setting remains unchanged even if you restart the washing machine.
• If you turn on Alarm after connecting your washing machine and the dryer with the multi-control
connection cable, the sound only plays on the multi-control panel.
• If you disconnect the multi-control connection, the sound plays on each appliance which you
manipulate.
Calibration
You can run calibration again for accurate weight detection.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Calibration, and then tap .
- Calibration does not start if the door is not closed properly.
- The drum rotates clockwise and anticlockwise for about 3 minutes.
3. When calibration is complete, the “Calibration complete” message appears on the display and the
washing machine turns off automatically.
Untitled-2 46 2021-01-06 7:15:38
Loading ...
Loading ...
Loading ...