HT90GHB2 User Manual

Loading ...

SAFETY AND WARNINGS

and in compliance with any applicable local building

and electricity regulations. Failure to install the

appliance correctly could invalidate any warranty

orliability claims.

• If the power supply cable is damaged, it must be

replaced by the manufacturer, its service agent or

similarly qualified person in order to avoid a hazard.

• To comply with electrical safety regulations, this

cooker hood must be connected to a socket near

theappliance. The socket must be accessible, or

have an accessible isolating switch, to enable the

end user to isolate the cooker hood from the power

for the purpose of internal cleaning or maintenance.

• A power outlet should be within 750 mm of the

motor assembly and can be either on the wall,

behind the chimney or in the ceiling.

• Always switch the power off prior to installation,

servicing or cleaning the cooker hood.

• Ducting accessories are not supplied. All ducting must

comply with local requirements and building codes.

• Before connecting any pipes, consult municipal

ordinances to ensure that any applicable regulations

concerning the discharge of exhaust air are adhered

to and request permission from the person in charge

of the building.

• Exhaust air must not be discharged into an

existing flue that is used for exhausting fumes from

appliances burning gas or other fuels. There shall be

adequate ventilation of the room when the cooker

hood is used at the same time as appliances burning

gas or other fuels.

Loading ...

User Manual - Page 7