Loading ...
Loading ...
Loading ...
17
INSTALLATION INSTRUCTIONS
3
Attach hood to wall
Open the front panel on the hood and remove the filter as shown in figures 4 – 6.
Fig.4 Fig.5 Fig.6
Hang hood off upper hood mounting screw with 2mm gap. Hang off the keyhole
attachment points on the back of the hood (see Fig.7). Tighten screws.
Fig.7
Attach internal hood mounting screws to fix hood to wall. Use the 60mm screws.
Reattach filter and close front panel.
4
Attach ducting
Attach ducting and vent outside
5
Attach chimney
Place chimney around the chassis, align the tabs with the slots and attach to the
chimney bracket.
Extend the upper chimney and attach to the upper chimney bracket with 10mm
screws (if using upper chimney).
Loading ...
Loading ...
Loading ...