Loading ...
Loading ...
Loading ...
14
INSTALLATION INSTRUCTIONS
Installation
WARNING!
This product is heavy and requires two persons for installation.
WARNING!
Failure to install the screws or fixing device in accordance with these instructions may
result in electrical hazards.
The manufacturer is not liable for any damage caused by not following these instructions.
1
Preparing for installation:
Before installing your cooker hood:
Please read the instructions carefully.
Unpack the hood and check all functions are working.
Ensure the voltage (V) and the frequency (Hz) indicated on the serial plate match
thevoltage and frequency of the installation site.
Check that the area behind the installation surface to be drilled is clear of any
electrical cables or pipes etc.
The stainless steel and glass surfaces of the hood are very easily damaged during
installation if grazed or knocked by tools. Please take care to protect the surfaces
during installation.
Protect the hob surface below with cardboard, or the like, to prevent damage
occurring whilst the cooker hood is being installed above.
Temporarily mark the height of the bottom of the cooker hood and the centre of the
hob on the wall according to the information given in the ‘Installation Instructions –
Height of cooker hood’ section.
The wall used for mounting the cooker hood should have sufficient strength and a
flat surface.
2
Attach chimney bracket and hood mounting screws
Attach the chimney bracket and upper
chimney bracket (if using the upper chimney)
in the locations shown in Fig.2 and 3. Use
the 30mm screws and expansion plugs if
attaching to masonry.
Attach the upper hood mounting screws
in the locations shown in Fig.2 and 3. Use
the 60mm screws and expansion plugs if
attaching to masonry. Ensure that there is a
2mm gap between the screw head and the
wall – see Fig.1
2 mm
Fig.1
Loading ...
Loading ...
Loading ...