Loading ...
Loading ...
Loading ...
9
Rear mounting (reversible mode)
An optional aspiration assembly mounting position (opposite side)
for island cabinet locations. The aspiration assembly (metalic plate,
lters), can be moved to the opposite side (rear) of the vent.
A
B
C
D
A. Motor box
B. Aspiration orientation
C. Cooktop
D. Ensamble de aspiración
1. Move the aspiration plate and the grease lters and put them
aside. (See the Cleaning section).
2. With the help of a at head screwdriver, gently take off the
aspiration plate plastic clips.
3. Once the clips were removed from the aspration assembly, retire
the screws and washer as shown the image below. Put the
screws aside.
4. Unplug the aspiration assembly’s electrical connection, and
remove it from the hood.
NOTE: Once you have unplug the connector, cover it with the shrink-
able wire tube and the plastic ties as shows the image below. Set free
the opposite connector.
A
B
C
A.Plastic wire clip
B. Shrinkable wire tube
C. Aspiration assembly connection
5. Remove the mounting screws from the aspiration structure as
shown the image below.
B
A
A. Aspiration structure
B. Installation screws
6. Lift the structure and ip it to the opposite side and x it with the
same screws previously removed.
NOTE: In order to properly align the structure, begin installing the
screws shown in the drawing.
A
A. Installation screws
7. Plug the electrical conexion and put it into place.
8. Put back the screws and metal washers to the aspiration
assembly. Insert the plastic clips back.
9. Relocate the grase lters and the aspiration plate.
Loading ...
Loading ...
Loading ...