Loading ...
Loading ...
Loading ...
Problem solving guide
75
Water inlet fault
Problem Possible cause and remedy
The Inle
t/Drain indica‐
tor light flashes.
The tap is turned off.
T
urn on the tap fully.
The dishwasher stops
during a programme.
The Inlet/Drain indica‐
tor light flashes.
Fault code or ap‐
pears in the display.
Before rectifying the problem, you must:
Switch the dishwasher off with the b
utton.
Water intake is restricted.
T
urn on the tap fully and start the programme
again.
Clean
the water inlet filter (see "Maintenance").
The wat
er pressure at the intake is lower than 30
kPa (0.3 bar).
Seek professional advice.
Water drainage fault
Problem Possible cause and remedy
The dishwasher stops
durin
g a programme.
The Inlet/Drain indica‐
tor light flashes.
Fault code appears
in the display.
Before rectifying the problem you must:
Switch the dishwasher off with the butt
on.
The water outlet is restricted.
Ther
e might be water in the wash cabinet.
Clean
the filter combination (see "Cleaning and
care - Cleaning the filters").
Clean
the drain pump (see "Maintenance").
Clean
the non-return valve (see "Maintenance").
Remove any ki
nk or loop in the drain hose.
Loading ...
Loading ...
Loading ...