Loading ...
Loading ...
Loading ...
Before using for the first time
28
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best r
esults.
The rinse aid dosage is set in stages
fr
om 0 to 6. It is set to 3 at the factory.
This is the recommended setting.
If the "Adjust Sensor wash" programme
function (depending on model) has
been activat
ed, the amount of rinse aid
dispensed in the
Sensor wash p
ro‐
gramme can be higher than that set.
If spots appear on crockery and glass‐
war
e:
Incr
ease the rinse aid dosage.
If clouding or smearing appears on
cr
ockery and glassware:
Decr
ease the rinse aid dosage.
Switch the dishwasher off with the
butt
on, if it is switched on.
P
ress the
Start butt
on in and, whilst
holding it in, switch the dishwasher
on using the button.
Keep the
Start
button pressed in for
at least 4 seconds until the
Start indi‐
cat
or light comes on.
If this does not happen, start the proce‐
dur
e from the beginning again.
Press the button 3 times.
The indica
tor will flash rapidly 3
times at intervals.
The dosage set will appear in the dis‐
play aft
er .
The flashing sequence
will appear in
the display.
This indicates the factory default setting
3.
Use the Start butt
on to select the set‐
ting required.
Each press of the button moves you
up a level. After reaching the highest
value, the counter starts from the be‐
ginning again.
The setting is now stored in memory.
Switch the dishwasher off with the
butt
on.
Loading ...
Loading ...
Loading ...