Loading ...
Loading ...
Loading ...
Engine Oil u Changing Engine Oil & Filter
79
Maintenance
7.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
8.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
9.
Install a new oil filter and tighten.
10.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
11.
Fill the crankcase with the recommended
oil (2 P. 63) and install the oil fill cap.
12.
Check the oil level. 2 P. 76
13.
Check that there are no oil leaks.
14.
Install the lower fairing.
Rubber
seal
Oil filter
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m).
Required oil
When changing oil & engine oil
filter:
3.2 US qt (3.0 liters)
When changing oil only:
3.0 US qt (2.8 liters)
Loading ...
Loading ...
Loading ...