Loading ...
Loading ...
Loading ...
Tire Puncture u Removing Wheels
114
Troubleshooting
9.
Install the left brake caliper and tighten
the mounting bolts.
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
u Use new mounting bolts when
installing the brake caliper.
10.
Lower the front wheel on the ground.
11.
Apply the brake lever several times.
Then, pump the fork several times.
12.
Retighten the left axle pinch bolts.
13.
Raise the front wheel off the ground
again, and check that the wheel rotates
freely after you release the brake.
14.
Install the wheel speed sensor, sensor
guide and tighten the bolts, then check
the clearance between the wheel speed
sensor and the pulser ring.
15.
Remove the protective tape or cloth.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Torque: 33 lbf·ft (45 N·m, 4.6 kgf·m).
Torque: 30 lbf·ft (40 N·m, 4.1 kgf·m).
NOTICE
When installing the brake calipers into position on
the fork legs, carefully fit the brake disc between the
pads to avoid scratching them.
CBR1000RR/RA
CBR1000S
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m).
CBR1000RA only
Loading ...
Loading ...
Loading ...