Loading ...
Loading ...
Loading ...
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
10.
Lower the front wheel on the ground.
11.
Apply the brake lever several times. Then,
pump the fork several times.
12.
Retighten the right axle pinch bolts.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m).
13.
Raise the front wheel off the ground
again, and check that the wheel rotates
freely after you release the brake.
14.
Uncover the protective tape or cloth.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
#
Rear Wheel
Removal
1.
Place your motorcycle on a firm, level
surface.
2.
Loosen the rear wheel nuts.
3.
Support your motorcycle securely and raise
the rear wheel off the ground using a hoist.
4.
Remove the muffler mount bolt, washer and
nut.
5.
Remove the right step bracket bolt A.
Tire Puncture u Removing Wheels
Troubleshooting
132
Muffler mount bolt
Washer
Nut
Right step bracket bolt A
Loading ...
Loading ...
Loading ...