Loading ...
Loading ...
Loading ...
6.
Remove the oil filter cover by removing
the bolts and washers.
7.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
8.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
9.
Install the new oil filter and tighten.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
10.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m)
11.
Fill the crankcase with the recommended oil
(2 P. 84, 2 P. 165) and install the oil fill cap.
Required oil
When changing oil & engine oil
filter:
3.2 US qt (3.0 L)
When changing oil only:
2.9 US qt (2.7 L)
12.
Check the oil level. 2 P. 96
13.
Check that there are no oil leaks.
14.
Install the parts in the reverse order of
removal.
Engine Oil u Changing Engine Oil & Filter
Maintenance
99
Rubber
seal
Oil filter
Oil filter cover
Bolts
Washer
Washer
Loading ...
Loading ...
Loading ...