INSTALLATION INSTRUCTION
LED RECHARGEABLE LIGHT
Specifications
Watts: 10W;20W
Beam Angle: 100’D
Color : Cool White 6400K
Lumens: 700/300lm;1400/700lm
Battery: 3.7V Li-Ion,3600mAh;7200mAh
Life Span: 30,000 Hours
On/Off: >15000
CRI: >80
PF : >0.9
Body Color : Green+Black
Function : 100%-50%-SOS
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read
these instructions carefully before starting the installing and keep this manual handy for future
reference. If you have any another query, please contact our dealer or local vendor from whom
you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to
damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the
product.
2
YEAR
WARRANTY
*
WEEE Number: 80133970
Batteries
1. Never attempt to open for any reason.
2. Do not store in locations where the temperature may exceed 40 °C.
3. Charge only at ambient temperatures between 4 °C and 40 °C.
4. Charge only using the charger provided with the tool.
5. When disposing of batteries, follow the instructions given in the section “Protecting the environ-
ment”.
6. Do not cause short circuits. If connection is made between the positive (+) and negative (-)
terminal directly or via accidental contact with metallic objects, the battery is short circuited and an
intense current will flow causing heat generation which may lead to casing rupture or fire.
7. If batteries are heated to above 100 °C, sealing and insulating separators and other polymer
components may be damaged resulting in electrolyte leakage and/or internal short circuiting leading
to heat generation causing rupture or fire. Moreover do not dispose of the batteries in fire, explosion
and/or intense burning may result.
8. Under extreme conditions, battery leakage may occur. When you notice liquid on the battery,
proceed as follows:
•- Carefully wipe the liquid off using a cloth. Avoid skin contact.
•- In case of skin or eye contact, follow the instructions below:
i. Immediately rinse with water. Neutralize with a mild acid such as lemon juice or vinegar.
ii. In case of eye contact, rinse abundantly with clean water for at least 10 minutes. Consult a
physician.
Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do not incinerate the battery.
1. Use the charger provided with the tool only to charge the battery
2. Never attempt to charge non-rechargeable batteries.
3. Have defective cords replaced immediately.
4. Do not expose to water.
5. Do not open the charger.
6. Do not probe the charger.
This is not a toy; children should not permit to use it. This is a DIY product, all electronic
parts fixed already, any intention of opening the light or changing the design of the floodlight
is prohibitive.
Do not attempt to replace or change or the diode lights! If the protective glass is cracked or
broken, it must be replaced before the Rechargeable Floodlight can be used again.
Safety Instructions For Batteries
Safety Warning
Safety Instructions For Charger
1. Rechargeable Floodlight head
2. LED lamp assembly
3. Portable bracket
4. Protective cover
5. USB socket
6. Micro socket
7. LED indicator
8. ON/OFF switch with mode function
The LED Rechargeable Floodlight’s portable bracket
(3) is adjustable (Max. 45°). Adjust the bracket to
the suitable position before using.
NOTE: Do not exceed the adjustable stands range
as will lead to damaging the bracket
Bracket Adjustment
Major Components
Fig. 2
Fig. 1
1. Open the protective cover (4) and push the micro plug
(a) into micro socket (6).(Refer to Fig. 2)
2. Plug the adapter into a suitable mains outlet. Do not use
an extension cord.
3. When the battery is loaded, three LED indicators (7) all
illumine (Red light, yellow light and green light light up in
sequence). (Refer to Fig. 2)
NOTE: Close the protective cover after full charge which to
avoid water enter. (Refer to Fig. 2)
NOTE: The LED indicator only will show red that means it‘s
batteries will soon run out and need to recharge.
NOTE: Don’t turn the Rechargeable Floodlight on/ use USB
while charging.
• To reduce the risk of injury, user must read and understand instruction manual.
• Always make sure the light is off and complete cool before attempting to clean it.
CHARGING THE Rechargeable
The USB DC 5V 1A output socket (8) can use for
all kinds of device which can be charged by USB
cord (b), such as mobile phone, MP3/MP4,
Bluetooth headset etc.(Refer to Fig. 2)
NOTE: The USB output will stop output
automatically if the total working current of the
total connected device exceed the limit.
SWITCH ON/OFF AND LUMEN ADJUSTMENT (See Fig. 2)
The Rechargeable Floodlight is equipped with an ON/OFF switch with mode function (8) locate on the
back side of the Rechargeable Floodlight.
The LED Rechargeable Floodlight’s brightness is adjustable.
With press ON/OFF switch (8): 1st press: 100% brightness; 2nd press: 50% brightness; 3rd press: SOS
flashing; 4th press: OFF.
Discharging time: About 3 hours for 100% brightness;
About 5 hours for 40% brightness;
USB OUTPUT
OPERATION
WARNING!
Fig. 5
Fig. 4
In case of any query/issue with the product please reach out to us at [email protected]
V-TAC EUROPE LTD, Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
