Loading ...
Loading ...
Loading ...
17
How to Measure Blood Pressure
While blood pressure is being measured, constantly monitor the user and the blood pressure
monitor to make sure there are no problems.
To print measurement results, printer paper must be loaded. (Page 14)
1. Set the [POWER] switch to the ON position.
2. If a thick garment such as a jacket or sweater
is worn, it should be removed.
Measurement is possible on bare skin or over thin
clothing.
3. Sit on the chair, insert the arm into the arm
cuff, and place the elbow on the elbow rest.
When the elbow rest detects the elbow, the elbow
detection lamp (blue) stops blinking and remains lit.
• When the elbow is removed from the elbow rest, the elbow detection
lamp resumes blinking.
• Measurement is possible with the right arm or the left arm.
• The moveable cuff allows even tall people to assume the correct
body position.
4. Relax, take two or three deep breaths, and remain quiet.
Notes:
• The volume of the audio voice and other settings related to measurement can be
configured in function selection mode. (Page 23)
• If the monitor operates abnormally and does not stop inflating during measurement,
press the [EMERGENCY STOP] switch.
• The monitor cannot be used to measure blood pressure on pre-elementary school
children, or on children whose arm circumference is not within the range 17 cm to 42 cm.
Bare skin or thin clothing
Elbow rest
Elbow detection lamp
HBP-9020.fm 17 ページ ２０１０年１０月１４日 木曜日 午前８時５７分
Loading ...
Loading ...
Loading ...