Nautilus E686 User Manual

Loading ...

3. Click the Upload button on the web site.

4. IntheUploadFilewindow,locateyourUSBDrive.Selecttheworkoutdatalefromit,andclicktheuploadbutton.

Your workout data will upload into your account.

5. To sync your workout data with MyFitnessPal

, select the Menu option in the upper left corner of the web page and

select the “Sync to MyFitnessPal

” option.

Note: Nautilus Connect™ will automatically sync your workouts with MyFitnessPal

after the initial syncing.

A User’s Guide for Nautilus Connect™ can be found online at www.nautilusconnect.com.

Remote Heart Rate Monitor

MonitoringyourHeartRateisoneofthebestprocedurestocontroltheintensityofyourexercise.ContactHeartRate

(CHR) sensors are installed to send your heart rate signals to the Console. The Console can also read telemetry HR

signals from a Heart Rate Chest Strap Transmitter that operates in the 4.5kHz - 5.5kHz range.

Note: The heart rate chest strap must be an uncoded heart rate strap from

Polar Electro or an uncoded POLAR

compatible model. (Coded

POLAR

heart rate straps such as POLAR

OwnCode

chest straps

will not work with this equipment.)

If you have a pacemaker or other implanted electronic device, consult

your doctor before using a wireless chest strap or other telemetric heart

rate monitor.

NOTICE: To prevent interference with the telemetry HR receiver, do not

place any personal electronic devices in the left side of the media

tray.*

Contact Heart Rate Sensors

Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless steel

parts of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch both the

topandthebottomofthesensors.Holdrm,butnottootightorloose.Bothhandsmustmakecontactwiththesensorsfor

the Console to detect a pulse. After the Console detects four stable pulse signals, your initial pulse rate will be shown.

Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds. The Console will now

validatetheheartrate.Manyfactorsinuencetheabilityofthesensorstodetectyourheartratesignal:

• Movement of the upper body muscles (including arms) produces an electrical signal (muscle artifact) that can interfere

with pulse detection. Slight hand movement while in contact with the sensors can also produce interference.

• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.

• Some Electrocardiogram (EKG) signals generated by individuals are not strong enough to be detected by the sensors.

• Theproximityofotherelectronicmachinescangenerateinterference.

If your heart rate signal ever seems erratic after validation, wipe off your hands and the sensors and try again.

Heart Rate Calculations

Yourmaximumheartrateusuallydecreasesfrom220BeatsPerMinute(BPM)inchildhoodtoapproximately160BPMby

age60.Thisfallinheartrateisusuallylinear,decreasingbyapproximatelyoneBPMforeachyear.Thereisnoindication

thattraininginuencesthedecreaseinmaximumheartrate.Individualsofthesameagecouldhavedifferentmaximum

heartrates.Itismoreaccuratetondthisvaluebycompletingastresstestthanbyusinganagerelatedformula.

Yourat-restheartrateisinuencedbyendurancetraining.Thetypicaladulthasanatrestheartrateofapproximately72

BPM, whereas highly trained runners may have readings of 40 BPM or lower.

Loading ...

Nautilus E686 Elliptical

User Manual - Page 30