Loading ...
Loading ...
Loading ...
Assembly / Owner’s Manual
37
Pausing or Stopping a Workout
1. With a rm hold on the Handlebars, step off of the belts and onto the Side Foot Support Platforms on either side of the Treadles.
2. Push STOP to pause the workout. The belts will slow to a complete stop.
Note: If a paused workout is not restarted in 5 minutes, the machine will shut down and clear all workout values.
3. To restart your workout, push the START button. To end your workout, push STOP again. The Console will display your results.
To prevent unsupervised operation of the machine always remove the Safety Key and disconnect the power cord from the wall outlet and
machine AC input. Place the power cord in a secure location.
Console Service / Setup Mode
The Console has a Service / Setup Mode. Some options in the Service / Setup Mode can be adjusted to your preferences, but most are helpful for
service of the machine. To access the Service / Setup Mode, hold down the Increase and Decrease buttons for 2 seconds.
Order Display Option Description
1 Unit Units Select your preferred unit of measurement; “Lb” = English Imperial, “Si” = metric
2 brt Brightness Control the contrast level of the Console; “8” = maximum intensity, “1” = minimum
3 LOG Error Log * Displays error codes, starting with the most recent
4 Con Console Version * Displays the software version
5 dr Drive Version * Displays the drive version
6 HrS Device Usage Displays total number of hours and minutes used
7 diSt Device Mileage Displays total mileage
8 HiSt Motor Current History * Displays the average motor current for the current maintenance interval. Push the Decrease
button to view the averages of previous intervals.
9 Hd Hardware Type * Displays the hardware type
10 Curr Motor Current * Displays the current of the motor
11 CoAS Coast Time * A test to see how long until the belts stop.
12 LooP Loop Back * A test to see if the Console is receiving data.
13 CSn Console Serial Number Displays the serial number of the Console across all the displays
14 dSn Drive Serial Number * Displays the serial number of the Motor Control Board across all the displays
15 dES Drive Error Statistics * Displays the latest hard error statistics for the Motor Control Board. Push the Increase and
Decrease buttons to view all error statistics.
* for Service Technicians
Use the Increase and Decrease buttons to cycle through the Options. To change the value of an Option, push START and use the Increase and
Decrease buttons to select the desired value. Push START to assign the new value to the Option.
Push STOP to exit an Option and the Service / Setup Mode.
Loading ...
Loading ...
Loading ...