WMFL9 User Manual

Loading ...

8 / EN

Washing Machine / User’s Manual

4.1.6 Adjusting the feet

CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced

on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing

and vibration problems.

CAUTION: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

1 Loosen the lock nuts on the feet by hand.

2 Adjust the feet until the product stands in a stable and balanced way.

3. Tighten all lock nuts by hand again.

4.1.7 Electrical connection

Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any

damages that will arise when the product is used without grounding in accordance with the local regulations.

• Connectionmustcomplywithnationalregulations.

• Thewiringfortheelectricaloutletcircuitmustbesufficienttomeettheappliancerequirements.Useofa

Groud Fault Circuit Interrupter (GFCI) is recommended.

• Powercableplugmustbewithineasyreachafterinstallation.

• Ifthecurrentvalueofthefuseorbreakerinthehouseislessthan16Amps,haveaqualifiedelectrician

install a 16 Amp fuse.

• Thevoltagespecifiedinthe"Technicalspecifications"sectionmustbeequaltoyourmainsvoltage.

• Donotmakeconnectionsviaextensioncablesormulti-plugs.

CAUTION: Damaged power cables must be replaced by the Authorised Service Agents.

4.1.8 Initial use

Before starting to use the product make sure that the preparations are

made which are in line with the “Important Safety and Environment

Instructions” and the instructions in the “Installation” section.

To prepare the product for washing laundry, perform first operation

in Drum Cleaning programme. If this program is not available in your

machine, apply the method which is described in the section 4.4.2.

Use an anti-limescale suitable for the washing machines.

Some water might have remained in the product due to the quality control processes in the production. It is not harmful for

the product.

Loading ...

User Manual - Page 8