Loading ...
Loading ...
Loading ...
19
en
Cleaning and servicing
Blender
(some models)
W Risk of injury from sharp blades /
rotating drive!
– Never place fingers in the attached
blender!
– Do not remove / attach the blender until
the drive is at a standstill!
– Blender will not work unless the cover
has been attached and locked.
W Risk of scalding!
– If processing hot liquids, steam escapes
through the funnel in the lid.
– Add a max. 0,5 litres of hot or
frothing liquid.
Caution!
Blender may be damaged. Do not process
deep-frozen ingredients (except ice cubes).
Do not operate blender when empty.
X Fig. C
■ Remove protective cover from the
blender drive.To do this, press the back
of the protective cover and remove
the cover.
■ Place the protective cover on the drive
for bowl / tools.
■ Attach the blender and rotate all the way
in an anti-clockwise direction. Ensure
that the marks on the blender and
appliance are in alignment!
■ Add ingredients.
Maximum amount of liquid ingredients
= 1,25 litres;
Maximum amount of frothing or
hot liquids = 0,5 litres;
Optimum processing amount of
solid ingredients = 100 grams.
■ Attach the cover and as far as possible
in a clockwise direction. The lug on the
blender cover must be fully located in
the slot in the blender handle! Blender
will not work unless the cover has been
attached and locked.
■ Set the rotary switch to the desired
setting.
Important information
When working, hold the blender cover by
the edge.
Adding more ingredients
■ Switch off the appliance with
the rotary switch.
■ Remove the lid and add ingredients
or
■ take out the funnel on the blender cover
and gradually add solid ingredients via
the feed tube
or
■ pour liquid ingredients through
the funnel.
After using the appliance
■ Switch off the appliance with the
rotary switch.
■ Remove mains plug.
■ Rotate the blender in a clockwise
direction and remove.
Tip: It is recommended to clean the blender
immediately after use.
Cleaning and servicing
W Risk of electric shock!
Before working on the appliance, pull out
the mains plug.
Important information
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
Cleaning the base unit
W Risk of electric shock!
Never immerse the base unit in water or
place under running water. Do not use a
steam cleaner.
Caution!
Do not use abrasive cleaning agents.
■ Remove mains plug.
■ Wipe the base appliance and protective
cover with a damp cloth. If required, use
a little detergent.
■ Then dry the base unit.
Loading ...
Loading ...
Loading ...