Loading ...
Loading ...
Loading ...
16
en Important safety information
After each use, whenever the appliance is unsupervised, prior to
assembly, prior to disassembly, prior to cleaning and in the event
of an error, the appliance must always be disconnected from the
mains.
W Risk of injury!
Do not insert the mains plug until all preparations for working with
the appliance are complete.
Before replacing accessories or additional parts which move
during operation, the appliance must be switched off and dis-
connected from the power supply. After switching off, the drive
continues running for a short time. Wait until the drive has come
to a standstill.
If the protective cover is placed on the blender drive, the
appliance can be operated with the mixing bowl only.
If using the blender drive, place the protective cover on the
unused drive for the bowl.
While the appliance is operating, never place fingers in the
mixing bowl.
Do not attach or remove tools until the appliance is at a standstill –
when switched off, the appliance continues running briefly.
Never use tools and accessories or 2 accessories at the same
time. When using the accessories, follow the individual operating
instructions enclosed.
The accessory must be completely assembled before use.
Never assemble the accessory on the base unit.
Do not touch blender blades with bare hands. Clean them with
a brush.
Never reach into the attached blender!
Do not remove / attach the blender until the drive is at a standstill!
Blender will not work unless the cover has been attached and
locked. Never operate the blender empty.
Care shall be taken when handling the sharp cutting blades,
emptying the container and during cleaning.
W Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the
lid. Add a max. 0.5 litres of hot or frothing liquid.
W Risk of suffocation!
Do not allow children to play with packaging material.
W Caution!
We recommend that the appliance is never switched on for longer
than is necessary to process the ingredients. Do not operate
at no-load.
Loading ...
Loading ...
Loading ...