Loading ...
Loading ...
Loading ...
Setup menu
67 En
PREPARATION PLAYBACK SETTINGS
TROUBLESHOOTING
APPENDIX
Adjust the brightness of the front panel display. The smaller the
value, the dimmer the display.
When the Eco function is enabled, the specified brightness is
applied for only a few seconds.
Selectable item: -4 to -1, 0* (brightest)
Use to select the language used for menus displayed on the TV
screen.
Selectable item: (Japanese), ENGLISH* (English),
DEUTSCH (German), FRANÇAIS (French), ESPAÑOL
(Spanish), ITALIANO (Italian), NEDERLANDS (Dutch),
РУССКИЙ (Russian), SVENSKA (Swedish)
“ ”: Menus are displayed in Japanese.
“ENGLISH”: Menus are displayed in English.
“DEUTSCH”: Menus are displayed in German.
“FRANÇAIS”: Menus are displayed in French.
“ESPAÑOL”: Menus are displayed in Spanish.
“ITALIANO”: Menus are displayed in Italian.
“NEDERLANDS”: Menus are displayed in Dutch.
“РУССКИЙ”: Menus are displayed in Russian.
“SVENSKA”: Menus are displayed in Swedish.
Use to change the display unit of measurement.
Selectable item: METERS*, FEET
If units used for displaying measurements are changed from
“METERS” to “FEET” or vice versa, the change will not be
reflected in current settings. Configure settings again to reflect
the change in units.
Display information for the audio and video signal input to this
unit.
The following information on the current audio input signal is
displayed.
The following information on the current video input signal is
displayed.
Display the version of firmware currently installed on this unit.
DISPLAY settings
DIMMER
OSD LANGUAGE
DISTANCE UNIT
1)
INFORMATION settings
AUDIO
Format Digital audio format
Number of
channels
The number of channels contained within the input
signal—front/surround/low field effects (LFE).
Example: “3/2/0.1” means signal contains 3 front
channels, 2 surround channels, and LFE.
If the signal contains channels other than front,
surround, and LFE, the total number of channels
may be displayed. Example: “5.1ch”.
Sampling
frequency
The sampling frequency of the digital input signal
Bit rate
2)
The per-second bit rate of the input signal
VIDEO
Type HDMI or DVI
Resolution Video signal resolution
SYSTEM
• Hold down the SETUP key to display “OSD LANGUAGE” directly
on the TV screen.
• The settings may be changed automatically when using the TV which
supports the HDMI control function.
• Display language can only be selected for menus displayed on the TV
screen. Only alphanumeric characters are displayed in the front panel
display.
Audio bit rate may not be displayed for some input signals.
1) y 2) y
Loading ...
Loading ...
Loading ...