BDT20WTB User Manual

Loading ...

Page 7

INSTALLATION GUIDE

When you open the box, you should have received:

Portable dehumidier

User Guide

Castors (4)

Continuous Drain Kit

If you purchased a model with a pump (BDT50PWTB) there will be an additional

pump drain kit

To Install Castors:

1. For the 20 pint model (BDT20WTB) and the 30 pint model (BDT30WTB)

gently lift the lid of the bucket (see g 1).

For the 40 pint model (BDT40WTB) and the 50 pint models (BDT50WTB,

BDT50PWTB) gently lift off the lid of the bucket (see g 2). Do not pull on handle.

2. Tilt the dehumidier no more than

45 degrees and push to insert the castors

into the base of the unit. Make sure the ring

around the castor is ush against the

bottom of the dehumidier. (see g. 3).

SET UP & USE

Fig. 2

Fig. 3

Fig. 1

Bucket

lid

Hole

Buckle

lid

Float

1.Using two hands gently remove lid

from the top of the bucket.

2.Remove casters

from bucket

3.Re-install the lid and be

sure that it is securely

clipped into the bucket

Important Note: Verify the plastic float

system on the top of the bucket is still

securely installed and swinging properly

before placing bucket back in the

dehumidifier

Castors a nd

other acc es sories

DE T

Castors a nd

other acc es sories

Loading ...

User Manual - Page 7