Loading ...
Loading ...
Loading ...
19
Basic Operation
Turning the TV On and Off
How to turn the TV on or off
1. Insert the power cord plug into a polarized AC outlet.
2. If TV is in standby mode, press POWER button on
the remote control or button on the bottom panel of
LED TV.
3. Normal picture will be displayed on the screen after 15
seconds. If no signal input, "No Signal" will be displayed on the screen.
4. If temporary POWER off is required, press POWER button on the remote control or button
on the bottom panel.
5. If you want to completely switch off the power for this unit, unplug the power cord plug for this
unit.
6. After switching off the unit, you should wait at least 5 seconds before switching on again.
Status indication lamp
Red light on: In standby mode.
Green light on: In power on mode.
Auto power-off
1. If there is no signal, the TV will automatically enter standby mode after 10 minutes.
2. In VGA mode, if no any operation 15 seconds later, TV will enter standby mode.
Memory before turning TV off
The picture and sound settings and preset channels will be memorized at the point when the TV is
turned off. When the TV is started up again it will work accordingly with these settings.
Supporing Signals
This TV is embedded with one digital media player. It can find devices that support USB1.1/2.0,
including flash disk, USB hard disk and digital camera. It supports functions as: Display picture,
Play music files, Play video files.
Note: Please do not remove the cable during the data transfer. It may cause problems for
the system.
HD/FHD: MPEG-(1/2/4), MVC, H.264, H.265
Picture
Music
Video
Codec
Audio Codec
JPEG, PNG, BMP
MP-(1/2/3), AAC, AC3
MPG, MPEG, MP4, MKV, 3GPP, AVI, FLV
MP-(1/2/3), AAC, AC3
Container
Video Codec
Audio Codec
UHD: H.264, H.265
Loading ...
Loading ...
Loading ...