Loading ...
Loading ...
Loading ...
– 7
DANGER
– The appliance may not be operated in
explosive atmospheres.
–
Place the appliance on firm, even surface.
– The high-pressure cleaner must not be
used by children. (Risk of accidents on
account of improper use of the device).
– The water jet coming out of the high-
pressure nozzle causes the gun to re-
coil. Further, an angular spray pipe can
cause additional torque. Hence, hold
the spray lance and gun firmly.
– Make sure that feet are firmly planted
and you are holding the trigger gun with
one hand and your second hand is firm-
ly gripping the insulated portion of the
spray lance before starting discharge of
water.
– Never direct the water jet on to persons,
animals, the appliance itself or electrical
components.
–
Risk of injury from high-pressure jet and
unsettled dirt. Wear safety goggles, pro-
tective gloves, protective overalls and
special safety boots with foot protection.
– The jet must not be directed by the user
at him/herself or at other persons to
clean clothing or footwear.
– Do not use the device other persons are
within reach of it.
– Danger of hearing damage. Always
wear suitable hearing protection when
working with the device.
– Wheels/tyre valves must not be cleaned
with this device due to the high water
pressure.
– Do not clean materials containing as-
bestos or other health-hazardous sub-
stances.
– Pay attention to ensure that all screws
of all connecting hoses are tightened
properly.
– The lever of the trigger gun must not be
clamped tight during operation.
– Do not drive over the main cable or the
high pressure hose.
– Only work with sufficient lighting.
Open the water supply.
Plug in the mains plug.
Set the appliance switch to "I".
Unlock the safety lock at the hand-
spray gun by pressing it.
Press the lever on the hand spray gun.
몇 WARNING
The water jet that is emitted from the high-
pressure nozzle results in a repulsion power
acting on the hand spray gun. Make sure that
you have a firm footing and hold the trigger
gun and the spray lance with both hands.
The shoulder support (2.639-251.0) should
be used to prevent injuries and to make
work easier at recoil pressures > 150 N.
The appliance is equipped with the follow-
ing nozzles:
– Power nozzle, 15° spray angle
High pressure flat stream (15°) for large
areas of contamination.
The working pressure can be read from
the manometer.
Note:
Always direct the high-pressure jet at the
object to be cleaned from a distance to
avoid damage from high pressure.
Release the lever on the trigger gun.
Use the safety catch to secure the
handgun lever.
Store the hand spray gun and spray
pipe in the accessory mount.
OPERATION
Turning on the Appliance
High pressure operation
Power nozzle
Interrupting operation
9EN
Loading ...
Loading ...
Loading ...