Yamaha RX-A8ABL AVENTAGE 11.2 Channel AV Receiver With 8K HDMI & MusicCast RXA8ABL

Before connecting an XLR balanced cable, refer to the instruction manual of your device and verify that its XLR jacks are

compatible with the pin assignments.

For XLR output jacks, match the pins and insert the “female” plug of the XLR balanced cable until you hear a click. When

disconnecting the cable from the unit, hold down the lever of the plug and then pull it out.

We recommend using power amplifiers with volume control bypass (or without volume control circuit).

When you set the following speaker settings in “Power Amp Assign” in the “Setup” menu, some outputs from the PRE OUT jacks are

limited.

7.2 Bi-Amp +2Zone

“Setting your speaker system”(p.225)