Loading ...
Loading ...
Loading ...
Setting the equalizer
Selects the type of equalizer to adjust the tone.
Setup menu
“Speaker” > “Parametric EQ”
Settings
Manual Adjusts the equalizer manually.
YPAO:Flat Adjusts each speaker to achieve the same characteristics.
YPAO:Front Adjusts each speaker to achieve the same characteristics as the front speakers.
YPAO:Natural Adjusts each speaker to achieve the same characteristics with lowered high frequency range.
YPAO:Low Frequency Adjusts each speaker to compensate only low frequency range.
Through Does not use the equalizer.
NOTE
Select “YPAO:Flat”, “YPAO:Front”, “YPAO:Natural” or “YPAO:Low Frequency” and press ENTER again to view the results of adjusting
the tone. These functions are available only when the YPAO measurement results have already been saved.
Related links
(
“Flow of the speaker configurations”(p.115)
(
“Basic operation of the Setup menu”(p.213)
n
Adjusting the equalizer manually
You can adjust the equalizer manually. First, “Parametric EQ” in “Speaker” is set to “Manual”.
Setting range
Center frequency 15.6 Hz to 16.0 kHz (15.6 Hz to 250.0 Hz for subwoofer)
Q factor 0.500 to 10.080
Gain -20.0 dB to +6.0 dB
1 Select “Manual”.
2 Press ENTER again to enter the edit screen.
3 Select a speaker.
236
CONFIGURATIONS > Configuring various functions (Setup menu)
Loading ...
Loading ...
Loading ...