Loading ...
Loading ...
Loading ...
Installation Settings Guide
We’re here to help! Please contact our customer support team for assistance:
PHONE:
LIVE CHAT:
EMAIL:
VIDEOS:
SUPPORT HOURS:
856.234.8803
LuxProducts.com/support
techsupport@luxproducts.com
LuxProducts.com/Videos
8am to 6pm EST, Monday - Friday
-99 Factory Reset
Reset KONO Do Not Reset KONO
Use this setting to initiate a factory reset and to setup your KONO Smart from scratch.
For wiring diagrams, please reference the appendix
section of the KONO Smart Installation Manual
Lock: Press and hold the knob for 10 seconds on the main run screen to lock local
control of KONO Smart. When locked, press and hold the knob for 10 seconds
to unlock.
Power Cycle: Remove KONO Smart from its base and locate the black reset
button on the back of the thermostat. Press and hold this button for 3 seconds
to fully power cycle the device.
EMER Heat: If you have a Heat Pump system with stage 2 (auxiliary) heat
enabled, you can select EMER heat from the mode menu. When this is enabled,
the thermostat will not use the compressor heating stage and will use the
auxiliary heating stage as the only heat source.
-Additional Features