Gaggenau RW464761 Deals 400 Series Series 24 Inch Panel Ready Wine Cooler 400 Series 24 Inch Built-In Dual Zone Wine Cooler with 99 Bottle Capacity, Right Hinge, Glass Door, 10 Extension Wi

User Manual - Page 9

For RW464761.

PDF File Manual, 53 pages, Download pdf file

Loading ...
Loading ...
Loading ...
9
Switching the appliance on
Switch on the appliance with the On/Off button ÿ.
The appliance begins to cool. Light is switched on
when the door is open.
9 CAUTION:
Keep hands and fingers away from front and rear
openings of the refrigerator door when closing. Risk
of injury to hands or fingers.
Never allow children to climb on or play with
the refrigerator door.
Operating tips
When the appliance has been switched on, take
several hours until the set temperature been reached.
Set the language
The display languages can be changed according
to the table in the chapter Special functions, Setup
mode.
In order to change the display language:
1. Press setup button μ.
2. Press the selection button ¾ or ¿, until the set
language is displayed.
3. Press the setting button @ or A , until the desired
language is displayed.
4. Press the setup button μ, in order to store
the settings. The set temperature is displayed
again in the display panel.
Setting the temperature unit
The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F).
1. Press setup button μ.
The first menu (temperature unit) is displayed.
2. Press the @ or A setting button in order to switch
between degrees Fahrenheit (°F) and degrees
Celsius (°C).
3. Press the setup button μ, in order to store
the settings.
The set temperature is displayed again
in the display panel.
Setting the temperature
The temperatures in both climatic zones can be set
independently of each other from +41 °F to +68 °F.
We recommend a setting of +51 °F.
1. Activate setup mode with the selection button ¿.
2. Select the required climatic zone.
3. Set the required temperature with the @ (warmer)
or A (cooler) setting buttons.
Setting up the brightness of the
display
You can specify how bright the display should appear
when the door is closed.
1. Open the door.
2. Press the light switch 1 and keep it pressed.
3. Use the +/– buttons to adjust the brightness.
4. Release the light switch 1.
5. Close the door.
The display will have the specified brightness.
Loading ...
Loading ...
Loading ...