Loading ...
Loading ...
Loading ...
Black plate (488,1)
北米Model "A1220BE-A" EDITED: 2014/ 8/ 28
11-4
Maintenance and service/Maintenance precautions
system or it can render it inop-
erative. NEVER use a circuit
tester for this wiring. If your
SRS airbag or seatbelt preten-
sioner needs service, consult
your nearest SUBARU dealer.
NOTE
SUBARU does not endorse the use of
non-SUBARU approved flushing sys-
tems and strongly advises against
performing these services on a
SUBARU vehicle. Non-SUBARU ap-
proved flushing systems use chemi-
cals and/or solvents which have not
been tested or approved by SUBARU.
SUBARU warranties do not cover any
part of the vehicle which is damaged by
adding or applying chemicals and/or
solvents other than those approved or
recommended by SUBARU.
& Before checking or servicing
in the engine compartment
WARNING
. Always turn the ignition switch to
the “LOCK” (off) position and
apply the parking brake to pre-
vent the vehicle from moving.
. Always let the engine cool down.
Engine parts become very hot
when the engine is running and
remain hot for some time after
the engine is stopped.
. Do not spill engine oil, engine
coolant, brake fluid or any other
fluid on hot engine components.
This may cause a fire.
. When the ignition switch is in the
“ON” position, the cooling fan
may operate suddenly even
when the hybrid system is
stopped. If your body or clothes
come into contact with a rotating
fan, that could result in serious
injury. To avoid risk of injury,
perform the foll owing precau-
tions.
– Models with push-button start
system:
Always turn the push-button
ignition switch to the “OFF”
position and confirm that the
operation indicator on the
switch is turned off. Then take
the access key out from the
vehicle.
– Models without push-button
start system:
Always remove the key from
the ignition switch.
. Before performing any servicing
on a vehicle equipped with a
remote engine start system (if
equipped) temporarily place that
system in the service mode to
prevent it from unexpectedly
starting the hybrid system.
& When checking or servicing
in the engine compartment
WARNING
When performing inspection or
maintenance, if there is no need to
operate the engine, ensure that the
ignition switch is in the “LOCK” (off)
position. If you are performing in-
spection or maintenance while the
electric motor is in operation, the
engine could start during the work
and possibly lead to serious injury.
Loading ...
Loading ...
Loading ...