Loading ...
Loading ...
Loading ...
10
You can now adjust the following video settings:
[Full automatic control]
This full automatic control mode provides
a very easy way to get the best out of your
Philips SPC640NC webcam. Or you can choose
to have maximum manual control over the
webcam settings by switching the full automatic
control mode off. Full automatic control ‘on’ is
the preferred setting for normal use.
Techniques active within full automatic control
mode are:
[Frame rate]
A frame is a single picture or still shot, that is
shown as part of a larger video or movie. The
frame rate is the number of frames displayed
per second. The higher the frame rate, the
better the video display but the higher the
load on the processor.
You can use the scroll open menu to set
the frame rate of the video that you wish to
capture. For example, 30 fps means that the
webcam will capture video at 30 frames per
second.
[Auto Exposure]
The exposure is the amount of light received
by the sensor and is determined by how long
the sensor is exposed to capture a snapshot
or video frame. The result depends on the
VHQVLWLYLW\RIWKHVHQVRU7KHZHEFDPZLOOÀQG
the optimal setting if you select the automatic
exposure option.
[Shutter Speed]
The shutter speed determines how long the
camera shutter remains open as a picture
is taken. The slower the shutter speed, the
longer the exposure time. The shutter speed
controls the total amount of light reaching the
sensor.
Use the slider to set the desired shutter
speed.
Country (region) Region frequency
Europe 50 Hz
North America 60 Hz
China 50 Hz
Taiwan 60 Hz
Japan Region-dependent
Tip
3OHDVHFKHFN\RXUORFDOPDLQVRXWSXWWRÀQG
the correct [Region] setting.
Video settings
Click the [Video] tab.
The» [Video] settings screen appears.
Note
7RFKDQJHWKHYLGHRUHVROXWLRQÀQGDQGXVH
the corresponding function available in the
WebCam Companion.
EN
Loading ...
Loading ...
Loading ...