Loading ...
Loading ...
Loading ...
Operation
When the battery is too low, the machine will start automatically looking for
charging base.
Make sure that the charging base is powered on and minimize the obstacles,
otherwise the machine may not find the charging base.
In order to find the most appropriate charging position, the machine may
move back and forth around charging base for 3-4 times before the normal
charge.
Automatic return may fail if the water tank is installed.
2. Start/Pause/Sleep
Standby mode: Power switch is on, three buttons keep on and machine is
static.
Sleep mode: power switch is on, three buttons are off, and machine is static.
Work mode: Machine is working, (“ ”) light is on and machine enters cleaning
mode.
Make sure that the power switch at the bottom is on.
Press “ ” button on the main body or Start/Pause button on the remote
controller to start the machine.
!Caution: If the machine is in Sleep mode, press “ ” button to wake the
machine, and press it again to start cleaning.
3. Sleep
In case of no operation in 20-25 s, the machine will automatically enter Sleep
mode.
!Caution: If the product is not in use for long time, turn off the power switch first.
Pause is to switch the machine from Work mode to Standby mode, which can
be done by following operations:
A. Press the “Start / Pause” button on the remote controller.
B. Press “ ” button on the main body.
A.
B.
A.
B.
C.
D.
4. Automatic charging
Operation process: Sleep mode→Standby mode →Work mode
1. Power
2. Pause
9
Loading ...
Loading ...
Loading ...