PTAC
WIRELESS KITS (DT01A, DS01A, DD01A)
I
NSTALLATION INSTRUCTIONS
Part No. IO-644B
Printed in USA
June 2006
ATTENTION INSTALLING PERSONNEL
As a professional installer you have an obligation to know the product better than the customer. This
includes all safety precautions and related items.
Prior to actual installation, thoroughly familiarize yourself with this Instruction Manual. Pay special
attention to all safety warnings. Often during installation or repair it is possible to place yourself in a
position which is more hazardous than when the unit is in operation.
Remember, it is your responsibility to install the product safely and to know it well enough to be able to
instruct a customer in its safe use.
Safety is a matter of common sense...a matter of thinking before acting. Most dealers have a list of
specific good safety practices...follow them.
The precautions listed in this Installation Manual are intended as supplemental to existing practices.
However, if there is a direct conflict between existing practices and the content of this manual, the
precautions listed here take precedence.
The following installation instructions are for a typical installation.
Please contact your PTAC salesperson
for additional assistance and explanation prior to ordering materials or cutting openings.
USE ONLY ONE DD01A PASSIVE INFRARED MOTION SENSOR (PIR) DOOR
SWITCH COMBINATION DEVICE TO ONE DIGISMART PTAC UNIT.
DS01A
DD01A
DT01A
AIR CONDITIONING SENSOR
®
is a trademark of Maytag Corporation and is used under
license to Goodman Company, L.P. All rights reserved.
Loading ...
Loading ...
Loading ...
