Loading ...
Loading ...
Loading ...
41
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Small amount
ofwater in
thedrum at
endofcycle
Water tank needs to
be emptied.
Refer to ‘Emptying the water
collection tank’.
Environmental conditions
maybe affecting
dryer operation.
If conditions are particularly hot,
humidor cold, it is possible vaporised
water may re-condense in the drum
oron the inside of the door.
Noises Dryer is overloaded. Remove some items from the dryer.
Dryer has a fault. Continuous beeping or a musical
seriesof beeps with a message
displayed on the display.
Referto‘Customising a dry cycle’.
Beeps signalling the end
ofadrying cycle.
End of cycle beeps can be turned off.
Refer to ‘Dryer settings’.
Dryer has not been
levelledproperly.
Refer to your installation guide for
guidance on levelling.
Dryer makes
unfamiliar noises.
At the start of the cycle the dryer
may make some unfamiliar noises
when the compressor turns on.
Thisis normal.
Vibration Dryer is not installed on
astable surface.
Ensure the dryer is installed on a
flat, stable surface. Refer to your
installation guide for guidance on
levelling.
Dryer is not level. Ensure the dryer is correctly levelled.
Refer to your installation guide for
guidance on levelling.
Dryer is overloaded. Remove some items from the dryer.
Creasing Cycle selection not
appropriate for the load.
Select the
EASY IRON cycle to
minimisecreasing.
Dryer is overloaded. Remove some items from the dryer.
DRYNESS LEVEL selected
toohigh for load type.
Try selecting a lower DRYNESS LEVEL.
WRINKLE FREE option
notselected.
Select the WRINKLE FREE option to
rotate the load at the end of the
drying cycle. Refer to ‘User warnings’.
Dye transfer White/light and coloured
items not separated
beforedrying.
Remember to separate white/light
and coloured items before placing
them in the dryer.
Wet items left sitting in
thedryer for long periods
oftime before drying.
Refer to ‘Sorting’ for tips to prevent
dye transfer.
Loading ...
Loading ...
Loading ...