Loading ...
Loading ...
Loading ...
36
BEFORE YOU CALL FOR SERVICE
User warnings
Your dryer is capable of diagnosing a number of its own problems. It will sound a
continuous series of beeps and display a user prompt when it has a problem that you can
correct yourself. To stop the beeps sounding, touch any button on the control panel. Donot
try to continue your drying cycle once you stop the noise. You must address theproblem
the dryer is alerting you to.
Check the below table before you call for service.
NOTIFICATION WHAT TO DO
KEYLOCK ON
Touch and hold the button for threeseconds to deactivate
theKeylock.
CLEAN FILTERS AND
EVAPORATOR GRID
Clean lint and condenser filters and carefully vacuum the
evaporatorgrid.
Check the lint filter or condenser filter are not damaged.
Check there is nothing else trapped in the filters or evaporator grid,
whichmay be blocking the air flow.
Check the filters are correctly in place in your dryer.
WATER TANK
Check if the water tank is full.
Empty the water tank.
If using the drain hose, check whether the water tank or drainhose
isblocked.
Check the drain hose is still attached at the back of the machine,
andisnot kinked or squashed.
DOOR OPEN
Close the door fully and touch .
Try opening and closing the door again.
Reposition the load, make sure the load is correctly in the drum
andthatprotruding items are not preventing the door fromclosing.
THE LAUNDRY
ENVIRONMENT IS
TOO COLD FOR
THE DRYER TO
FUNCTION
The room temperature is too low for the heat pump system to work
effectively. Ensure that the room temperature is above five degrees to
avoidloss of efficiency.
MAXIMUM CYCLE
TIME HAS BEEN
REACHED
There are a number of reasons the maximum cycle time has been
reached, referto ‘Troubleshooting’, ‘Dryer is taking toolong.’ for
possible causes and solutions.
Once you have addressed the issue the user prompt was alerting you to, try using your
dryer as per usual. If the issue persists, call your Fisher & Paykel trained and supported
service technician.
Loading ...
Loading ...
Loading ...