Loading ...
Loading ...
Loading ...
en Before using for the first time
14
Initial use
After connecting the appliance to the power or following
a power cut, the settings for initial use are shown in the
display.
Note: You can change these settings at any time in the
basic settings. ~ "Basic settings" on page 22
Setting the language
German is the preset language.
1. Use the rotary selector to select the required
language.
2. Touch the Æ arrow.
The next setting appears.
Setting the clock
The time starts at 12:00.
1. Use the rotary selector to set the current time.
2. Touch the Æ arrow
Setting the date
The default date is 1.1.2014.
1. Always touch the Æ arrow to move to the next
setting.
2. Use the rotary selector to set the current day, month
and year.
Setting the water hardness
The default water hardness setting is "very hard".
Change this setting if your water is softer. You can ask
your water supplier about the water hardness level.
1. Set the hardness using the rotary selector.
2. Touch the Æ arrow.
A message appears on the display confirming that
the initial use has been completed.
With HomeConnect
1. Touch "Set using the assistant".
2. Further instructions can be found in section
~ "Home Connect" on page 23
Calibrating the appliance and cleaning the
cooking compartment
The boiling point of water depends on the air pressure.
During calibration, the appliance self-adjusts to the
pressure ratio at the installation location. This will
happen automatically the first time steam-assisted
cooking is used. This produces a lot of steam.
Preparing the appliance for calibration
1. Remove the accessories from the cooking
compartment.
2. Remove any leftover packaging, such as polystyrene
pellets, from the cooking compartment.
3. Before calibrating the appliance, wipe the smooth
surfaces in the cooking compartment with a soft,
damp cloth.
Calibrating the appliance and cleaning the cooking
compartment
Notes
■ Calibration cannot be started until the cooking
compartment is cold (room temperature).
■ Do not open the appliance door while calibration is
in progress, as this will abort the calibration process.
1. Press the on/off button to switch on the appliance.
2. Fill the water tank. ~ "Filling the water tank"
on page 18
3. Set the specified type of heating, temperature and
duration for the calibration, then start the appliance.
~ "FullSteam – Steam cooking" on page 16
4. Heat up the appliance following calibration.
Caution!
Enamel damage
Do not use the appliance if there is water on the
cooking compartment floor. Before using the
appliance, wipe away the water from the cooking
compartment floor.
5. Dry the cooking compartment floor.
6. Set the specified type of heating and temperature for
heating, then start the appliance.
7. Keep the kitchen ventilated while the appliance is
heating.
8. Stop the appliance once the specified time has
elapsed. Press the on/off button to switch off the
appliance.
9. Wait for the cooking compartment to cool down.
10. Clean the smooth surfaces with soapy water and a
dish cloth.
11. Empty the water tank and dry the cooking
compartment. ~ "After every steam operation"
on page 19
Notes
■ When relocating the appliance, restore its factory
settings once it is installed so that it can adapt to its
new location. Repeat the procedures for initial start-
up and calibration.
■ The appliance retains the calibration settings, even
in the event of a power cut or disconnection from the
mains. Calibration does not need to be repeated.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
Calibration
Type of heating Steam P
Temperature 100 °C
Cooking time 30 minutes
Heating up
Type of heating 4D hot air :
Temperature Maximum
Cooking time 30 minutes
Operating the appliance en
15
1Operating the appliance
Oper at i ng t he appl i anc e
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Exception: The childproof lock and the timer can be set
when the appliance is switched off.
Displays or information, e.g the residual heat indicator
in the cooking compartment, remain visible in the
display after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching on the appliance
Use the on/off button to switch the appliance on.
The on/off symbol above the button lights up in blue.
The studioLine logo appears in the display, followed by
a type of heating and a temperature.
Note: In the basic settings, you can specify which
operating mode should appear after the appliance is
switched on.
Switching off the appliance
Use the On/Off button to switch off the appliance.
The lighting above the button goes out.
A set function is cancelled.
The time appears in the display.
Note: You can set whether or not the time should be
displayed when the appliance is switched off in the
basic settings.
Starting or interrupting operation
To start operation or to interrupt an operation which has
started running, press the Start/Stop button. The
cooling fan may continue to run after an operation is
interrupted.
Press the On/Off button to delete all settings.
If you open the cooking compartment door during
operation, operation is interrupted. Close the cooking
compartment door to continue operation.
Selecting an operating mode
When you select an operating mode, the appliance
must be switched on.
1. Press the menu button.
The operating modes menu opens.
2. Touch the required operating mode.
Depending on the operating mode, different options
are available.
3. Use the rotary selector to change the selection.
Depending on the selection, change further settings.
4. Use the start/stop button to start.
The elapsed time appears in the display. The
settings and progress line can be seen.
Setting the type of heating and temperature
After the appliance is switched on, the set suggested
type of heating appears with the temperature. You can
start this setting immediately with the Start/Stop button.
If you want to set another type of heating, proceed as
follows.
For other settings, you can change the values as
follows:
Example in the picture: Top/bottom heating at 180 °C.
1. Use the rotary selector to change the type of
heating.
2. Touch the suggested temperature.
3. Use the rotary selector to change the temperature.
4. Press the Start/Stop button to start.
The set type of heating and the temperature are shown
on the display.
Rapid heat up
You can use the c button to heat up the cooking
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable types of heating:
: 4D hot air
% Top/bottom heating
& Intensive heat
&
7RSERWWRP
KHDWLQJ
$GGVWHDP
&
PLQV
$GGVWHDP
7RSERWWRP
KHDWLQJ
&
PLQV
$GGVWHDP
7RSERWWRP
KHDWLQJ
Loading ...
Loading ...
Loading ...