Loading ...
Loading ...
Loading ...
10 Care and maintenance
Lower spray arm
▸ Hold the spray arm 3 in the middle and pull hard up-
wards.
3
4
5
▸ Rinse the spray arm well under running water.
▸ Check the nozzles 4.
▸ Clean the filter system 5 and the coarse filter (see
page 45).
10.3 Cleaning the filter system
Only use soft materials for cleaning beneath the filter system. Never use metal ob-
jects.
An incorrectly assembled filter system can cause the appliance to malfunction.
▸ Open the appliance door and pull out the lower bas-
ket.
1
2
3
▸ Release the filter system in fine filter 1 in an anti-
clockwise direction and remove.
▸ Open the coarse filter 2 by pressing on closing lug 3
and clean the filter system under running water using
a brush.
▸ Remove any coarse debris.
▸ Replace the filter system and turn the fine filter 1 as
far as it will go in a clockwise direction.
10.4 Refilling with regeneration salt
Never fill the salt reservoir with detergent!
When the supply of regeneration salt is exhausted, the refill indicator flashes and the
following appears in the display:
Refill regeneration salt.
Then run the Pre-rinsing programme.
Lorem ipsum
Lorem ipsum
Lorem ipsum
▸ Open the box of regeneration salt.
▸ Open the appliance door and remove the lower basket.
▸ Open the cover 3 on the salt reservoir by lifting up the grip.
3
45
Loading ...
Loading ...
Loading ...