Loading ...
Loading ...
Loading ...
9 User settings
Storage duration of the tank Selection
If the user setting is activated, the last rinse
water is retained and used for the next pro-
gramme. If no programme is started, the water
is pumped off after the duration set. Three dif-
ferent durations are available for selection.
Once the tank has been filled approx. 20
times, it is rinsed through automatically and, as
a result, the programme time is extended by
about 30 minutes.
▪ : Activated (factory setting: 36
hours)
▪ : Deactivated
Emptying the storage tank Selection
Touch the button to immediately empty the
storage tank.
▪ : Empty storage tank
Emptying the tank in the event of a power
failure
Selection
If the user setting is activated, the storage tank
is emptied after a power failure even if the Eco
programme was running beforehand.
▪ : Activated
▪ : Deactivated (factory setting)
Heat pump * Selection
If the user setting is activated, the heat pump
may be switched on depending on the wash
temperature. Energy consumption is reduced
and the programme time extended. The pro-
gramme time also varies according to the set-
tings (user settings, additional functions). If
several programmes are started one after the
other, the heat pump may remain switched off.
▪ : Activated (factory setting: 36
hours)
▪ : Deactivated
* Depending on model
Hot water connection Selection
If the appliance has a hot water connection
and the setting is activated, optimum use is
made of the hot water available.
For the «No heating» setting: only enable if
the inlet water is at least 60 °C. The dishes
may not be completely dry by the end of the
programme. Leave the dishes in the appliance
(e.g. overnight) to dry.
▪ : Activated
▪ : No heating
▪ : Deactivated (factory setting)
Deleting favourites Selection
Touch «Delete» and confirm the prompt to
delete all the favourites.
▪ : Deleting
43
Loading ...
Loading ...
Loading ...