Loading ...
Loading ...
Loading ...
4 Functions
Error messages
In the event of A/F/U messages, the bottom 3 white LEDs and the top
3 white LEDs flash alternately.
4 Functions
Selection buttons enable the user to select and start frequently used programmes simply
and quickly at the touch of a button. The user can create and change a selection button
for any favourite programme and thus adapt it perfectly to their own work processes.
4.1 Programmes
Consumption values
The programme time (h), water consumption (l) and energy consumption (kWh) are in-
dicative values and refer to a one-phase connection 220–240 V 2 N. The values can
also vary according to the selection of additional functions, the load, the degree of soil-
ing of the load, the type and amount of detergent, the water inlet temperature, the elec-
trical connection and specific programme sequences (e.g. regeneration).
The programme time, water consumption and energy consumption can be re-
duced by selecting the «Energy saving» and «Partial load» setting options.
Programme times
The stated values exclude the final drying time.
The programme time depends on the following conditions:
▪ Connected load (for single-phase 230 V, 2200 W, 10 A connections, the duration of
the programme is extended by up to 15 minutes)
▪ Running time of the heat pump
▪ storage duration of the tank (with automatic rinsing of the tank, the programme time is
extended by up to 30 minutes)
Models with and without a heat pump (HP)
The water and energy consumption of models with a heat pump are different to those of
models without a heat pump. To ensure the heat pump is well ventilated the fan may turn
on even when the appliance is switched off. The energy that this consumes is attributed
to the programme that was running before the appliance was switched off.
13
Loading ...
Loading ...
Loading ...