Loading ...
Loading ...
Loading ...
Page 11
PLU (Price Look-up) Set Up
26. Press the Enter key again. Display will show: P01-01 <SALE1>
27. Use the right arrow key on the Scale Set-Up Keysheet to select the date. Display will show: P01-06 <DATE>
28. Press the Enter key. Display will show: P01-06-01 P/D PRN 2
NOTE: Select 1 for package date to appear on label or 2 to remove package date from label.
29. Key in 1 and press the Enter key.
30. Press the Enter key again. Display will show P01-06-04 SB DATE PRN 1
NOTE: Select 1 for sell by date to appear on label or 2 to remove sell by date from label.
31. Key in 1 and press the Enter key.
32. Press the Enter key again. Display will show: P01-06-07 SHELF LF 1
33. Key in the number of days to expire (3 digit maximum) and press the Enter key.
NOTE: This will be used if the sell by date is printed on the label.
34. Press the Enter key. Display will show: P01-06 <DATE>
35. Use the right arrow key on the Scale Set-Up Keysheet to select the code. Display will show P01-07 <CODE>
36. Press the Enter key. Display will show: P01-07-01 CODE 00000000
NOTE: The barcode can be the PLU number, which the scale defaults to, or the POS (point of sale)
number. If the PLU number is to be in the barcode simply press the Enter key. If the POS
number is to be in the barcode, key in the POS number (5 digit maximum) and press the Enter
key. The scale can be reprogrammed to accept a 6 digit PLU or POS number. Contact Globe’s
Technical Service Department for assistance.
37. Press the Mode key. Display will show: 19001-0000 ENT OR CLR.
NOTE: Press the Enter key to save or the CLR key to cancel.
38. Press the Mode key. Display will show: P01 PLU
39. Repeat steps 3 through 37 to enter additional PLU numbers. When complete, press the Mode key twice to
return to normal operation.
Deleting A PLU
1. Make sure the scale is plugged in, turned on and there is nothing on the platter.
2. Key in 9000 and press the Mode key. The display will show: P00 PROGRAM
3. Key in 1 and press the Enter key. Display will show: P01 PLU
4. Key in 111111 and press the PLU key.
5. Press the Enter key. Display will show: P01-00 PLU >No.<
6. Press the down arrow key two times. Display will show: P01-00 No. 1 >PL
NOTE: Use the down arrow to select the PLU number to delete.
7. Press the →0← Zero key. Display will show: 13002-0000 ENT OR CLR.
NOTE: Press the Enter key to save or the CLR key to cancel.
8. Press the Enter key.
9. Press the Mode key three times to return to normal operation.
Loading ...
Loading ...
Loading ...