Loading ...
Loading ...
Loading ...
8
USING YOUR HUMIDIFIER
Note:
• Low mist is the default setting when
the humidifier is first turned on.
• The power light will automatically
turn o after 30 seconds while the
humidifier is on. To check the current
mist setting, tap once. Tap again
to change the mist setting.
• Excessive humidity can cause health
issues and mold growth. If the relative
humidity in your room is over 60%,
use the low mist setting or turn o the
humidifier.
• If there is no water in the tank or the
tank is removed, the transducer will
turn o, the fan will turn o after 5
seconds, and will blink red before
turning o.
1. Place the humidifier on a level, elevated,
and water-resistant surface, such as a
table or nightstand. Make sure the room
is well-ventilated.
General Operation
Note:
• Position the humidifier at least
12 in / 30 cm away from walls and
appliances to prevent them from
getting wet. [Figure 2.1]
• Do not place the humidifier directly on
floors, carpets, or rugs.
• Direct the nozzles away from any
furniture to prevent your furniture from
getting wet.
2. Plug in the humidifier. will light up red
for 2 seconds then turn o.
3. Tap to turn your humidifier on. Tap
repeatedly to change the mist setting.
Control Button Color
Button Color Function
Blue Low mist setting is
selected
Orange Medium mist setting is
selected
Purple High mist setting is
selected
Blinking Red No water in tank or
tank not on base
No Color Humidifier is o
Humidifier has been
misting for more than
30 seconds
Figure 2.1
12 in /
30 cm
12 in /
30 cm
Loading ...
Loading ...
Loading ...