Loading ...
Loading ...
Loading ...
6
©
2015 DJI. All Rights Reserved.
N1 Video Encoder
User Manual
Power IN
Video OUT
7. Connect the other end of the power and video cables to the power and video ports of the N1
Video Encoder.
The N1 Video Encoder only supports the DJI N1 Flight Controller. Please strictly follow
the steps above to supply power to the device.
8. Use foam tape to mount the N1 Video Encoder to the expansion bay, gimbal mounting plate
or other at surfaces.
Usage
Video Encoding
1. Turn on the remote controller and then the Intelligent Flight Battery. Connect your mobile
device to the remote controller and turn on your camera.
2. Connect your camera to the N1 Video Encoder through the HDMI or AV port. The two video
ports cannot transmit together. See the Appendix for the pinout diagram of the AV port.
3. Launch the DJI GO app and enter Camer View. A live camera preview on the screen
indicates that the N1 Video Encoder is working normally.
If both the HDMI and the AV ports are connected, the HDMI signal will take priority.
Firmware Upgrade
Upgrading the Aicraft Firmware
1. Check the Battery Level and Storage Device
Ensure that the Intelligent Flight Battery has at least 50% battery level and that there is at
least 100MB of free space on your USB ash drive.
2. Prepare the Firmware Upgrade Package
1) Download the rmware upgrade package from the DJI Developer website.
(https://developer.dji.com/matrice-100/downloads)
2) Insert your USB flash drive into your PC. Extract all the downloaded files to the root
directory. While the M100 is powered off, remove the USB ash drive from your PC and
connect it to the upgrade port of the N1 Video Encoder using the upgrade cable.
Loading ...
Loading ...
Loading ...