Loading ...
Loading ...
Loading ...
4
©
2015 DJI. All Rights Reserved.
N1 Video Encoder
User Manual
You will require a 2.0mm hex key and foam tape to install the N1 Video Encoder onto the M100.
If you are using HDMI IN, prepare an HDMI cable. If you are using AV IN, prepare a soldering
iron, some solder and heat shrink tubing for wiring.
Installation
1. Remove the two screws (M3x8 self-tapping) on the Aircraft Status Indicator, and then detach
it from the upper plate gently to avoid damaging the cable.
2. Remove the 16 screws (M2.5x5) on the upper plate of the center frame, and the eight screws
(M2.5x8) on the mounting rails. Then remove the mounting rails and the upper plate.
M2.5x5
M2.5x8
Aircraft Status Indicator
Handle the indicator
cable gently
Loading ...
Loading ...
Loading ...