Loading ...
Loading ...
Loading ...
Frequently asked questions
79
Problem Possible cause and solution
White residue is visible
on the dishware. Cloud-
ing occurs on glass-
ware and cutlery; the
deposit can be wiped
off.
The rinse aid dosage is too low.
Increase the dosage (see “Settings menu – Rinse
aid”).
The salt reservoir is empty.
Fill the salt reservoir (see “Before using for the first
time – Dishwasher salt”).
The salt reservoir cap has not been screwed on cor-
rectly.
Replace it, making sure that it screws back on cor-
rectly.
The water softener is programmed to too low a water
hardness level.
Program the water softener to a higher water hard-
ness level (see “Settings menu – Water hardness”).
There are rust stains on
the cutlery.
A program was not run after dishwasher salt was
added. Traces of salt have got into the wash cycle.
Always run the Rinse & Hold program after refill-
ing salt.
The affected items are not corrosion resistant.
Purchase cutlery which is dishwasher-proof.
Loading ...
Loading ...
Loading ...