Loading ...
Loading ...
Loading ...
Initial commissioning
21
Water hardness
The display changes to the screen for
setting the water hardness.
– The dishwasher must be pro-
grammed to the correct water hard-
ness for your area.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– Where the water hardness fluctuates,
e.g., between 10-16gpg (10-15°d),
always program the dishwasher to
the higher value (16gpg in this exam-
ple).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
____________gpg
The dishwasher is programmed at the
factory for a water hardness level of
1gpg (1°d).
Use the arrow buttons to select
the hardness of your water supply
and confirm with OK.
See “Settings menu, Water hardness”
for more information on setting the
water hardness.
Finally, the notes Miele@home enabled
and Set up complete will appear in the
display.
After confirming these notes with OK,
the messages Refill salt and Refill
rinse aid may appear.
Add salt and rinse aid if necessary
(see “Before using for the first time –
Dishwasher salt” and “Rinse aid”).
Confirm the notes with OK.
The program selected will appear in the
display briefly and the indicator light for
the program selected will come on.
The display will then show the esti-
mated program duration for the pro-
gram selected.
These basic settings will be saved after
the dishwasher has been through one
complete program.
Loading ...
Loading ...
Loading ...