Loading ...
Loading ...
Loading ...
Settings menu
64
Volume
A sequence of buzzer tones will sound
at the end of the program or if there is a
fault as long as the buzzer has been ac-
tivated.
Buzzer in the event of a fault
The buzzer in the event of a fault will
sound four times at intervals with a
short pause between each set of tones.
The buzzer which sounds when there
is a serious fault cannot be deacti-
vated.
Buzzer at the end of a program
The buzzer at the end of a program will
sound four times at intervals with a
short pause between each set of tones.
The volume of the tone at the end of the
program can be selected in seven
stages. If no volume is selected, the
buzzer is switched off.
Select the Buzzer tone menu option.
Use the arrow buttons to set the
volume required and confirm your se-
lection with the OK button.
Keypad tones
A buzzer tone sounds each time a but-
ton is pressed.
The volume for the keypad tone can be
set to one of seven different settings. If
no volume is selected, the buzzer is
switched off.
Use the arrow buttons to set the
volume required and confirm your se-
lection with the OK button.
Refill reminders
If you consistently use a Tab detergent
and the refill indicators for salt and rinse
aid are bothering you, you can deacti-
vate them if you wish.
Select the setting you want and con-
firm with OK.
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add
dishwasher salt and rinse aid and to
switch the indicators back on.
Check filters
You can adjust the interval at which the
message to remind you to check the fil-
ters appears.
You can set an interval between 30 and
60 program cycles.
The “Check filters” message is set at
the factory to appear after every 50 pro-
gram cycles.
Select the interval you want and con-
firm this with OK.
Loading ...
Loading ...
Loading ...