Loading ...
Loading ...
Loading ...
90 Servicing Your Honda
Suspension
8. Remove the front axle nut (10) and loosen the
axle pinch bolts (11) on both forks.
Pull the front axle shaft (12) out of the wheel
hub and remove the front wheel with collars.
9. Remove the brake hose clamp bolts (13), stay
A (14) and stay B (15) from the left fork.
10. Remove the front brake caliper mounting bolts
(16) and brake caliper (17) from the left fork.
• Do not support the brake caliper by the brake
hose.
• Do not operate the brake lever after the front
wheel is removed. To do so will cause
difficulty in fitting the brake disc between
the brake pads.
11. Loosen the fork bridge lower pinch bolts (18),
when loosening the lower bolts make sure to
hold the fork tube so it dose not fall.
12. Pull the fork legs down and out.
13. Clean the fork assembly, especially the sliding
surface (19) of the slider and fork dust seal
(20).
14. Measure the length (21) between the axle
holder and outer tube and record it before
disassembling the fork.
(10) front axle nut (12) front axle shaft
(11) axle pinch bolts
(11)
(10)
(11)
(12)
(13) brake hose clamp bolts
(14) stay A
(15) stay B
(16) front brake caliper mounting bolts
(17) brake caliper
(18) fork bridge lower pinch bolts
Left fork:
(14)
(13)
(15) (16)
(17)
(18)
(19) sliding surface (21) length
(20) fork dust seal
(19)
(21)
(20)
Loading ...
Loading ...
Loading ...