Loading ...
Loading ...
Loading ...
74 Servicing Your Honda
Valve Clearance
7. Make sure that the dowel pins (12) are installed
into the camshaft holders (13).
8. Install the set rings (14) on the camshaft
bearing grooves (15).
NOTICE
Do not let the set rings fall into the crankcase.
Each camshaft holder has an identification mark
(16).
9. Install the camshaft holders (13) in their proper
position by aligning the camshaft holder
grooves with the set rings.
10. Apply engine oil to the camshaft holder bolt
threads and seating surface.
Tighten the camshaft holder bolts A (17) and B
(18) to the specified torque:
12 lbf·ft (16 N·m, 1.6 kgf·m)
Tighten the camshaft holder bolts in a crisscross
pattern in two or three steps.
11. Remove the tensioner stopper (19) from the
cam chain tensioner lifter.
12. Install a new sealing washer (20) and tighten
the cam chain tensioner lifter cover bolt (21).
(12) dowel pins
(13) camshaft holders
(14) set rings
(15) camshaft bearing grooves
(14)
(12)(13)
(12)
(14)
(15)
(16) identification marks
(13) camshaft holders
(17) camshaft holder bolts A
(18) camshaft holder bolts B
(16)
(17)
(18)
(13)
(13)
(19) tensioner stopper
(20) sealing washer (new)
(21) cam chain tensioner lifter cover bolt
(19)
(20)
(21)
Loading ...
Loading ...
Loading ...