Loading ...
Loading ...
Loading ...
17
CONTROLS AND SETTINGS
Alarms
Controls
DOOR OPEN
This alert indicates the door has been open for 5 minutes or more. The DOOR OPEN
LED will illuminate and the audible alert will sound until the door is closed.
The audible alert can be turned off by pressing the DOOR OPEN key or by closing
the door. If the door is ajar for 5 minutes, the interior light will turn off.
POWER OUTAGE
The POWER OUTAGE indicator light informs you there has been a power interruption.
Reset the alarm by pressing POWER OUTAGE.
HIGH TEMP
If the temperature increases above a safe temperature range, the red HIGH TEMP LED
light will illuminate and the alarm will sound. Reset the alarm by pressing HIGH TEMP.
1
2
3
The lock button can be used to lock the control panel. Press and hold for 3 sec-
onds to enable. While in the locked state, no changes can be made until unlocked.
Press and hold for 3 seconds to disable.
The settings icon illuminates upon opening the appliance door. Press the settings icon
to reveal other function icons. After 10 seconds of non use of icons or door closure, all
icons will fade except the settings icon.
Adjusting Temp
To adjust the temperature setting, press + to raise the temperature and - to lower
the temperature on the appliance control. Allow several hours for the temperature to
stabilize between adjustments.
Temp °F/°C
Short press to toggle between Fahrenheit (°F) and Celsius (°C).
CHILL BOOST
Turning on CHILL BOOST will cool the appliance down to a target temperature and will
remain active for up to 24 hours before automatically deactivating or being manually
exited. To turn the function on/off, press CHILL BOOST. When you turn off CHILL BOOST,
it will automatically reset the refrigerator back to the previous temperature setting.
AIR FILTERS
The AIR FILTERS replacement alert will illuminate when it is time to replace the air filters.
See the FILTER REPLACEMENT section for instructions on how to replace the air filters. After
changing the air filters, reset the AIR FILTERS alert by pressing and holding AIR FILTERS.
WATER FILTER
The WATER FILTER replacement alert will illuminate when it is time to replace the wa-
ter filter. See the FILTER REPLACEMENT section for instructions on how to replace the
water filter. After changing the water filter, reset the WATER FILTER alert by pressing
and holding WATER FILTER. After replacing the water filter, see the AUTOMATIC
WATER DISPENSER section for instructions on how to prime the water system.
WATER DISP
The illuminated WATER DISP LED means the internal water dispenser is ON. Open the
internal water dispenser by pushing the push-push nozzle. Press the water dispenser
paddle inside the cabinet to dispense water. Turn the dispenser off by pressing and
holding WATER DISP for 3 seconds. When the water dispenser is off, you cannot dis-
pense water. You will hear a beep if you try to press the paddle without WATER DISP
being turned on. Press and hold WATER DISP to turn it on.
6
4
5
7
9
10
11
8
Loading ...
Loading ...
Loading ...