Loading ...
Loading ...
Loading ...
13
WATER SUPPLY CONNECTION
Before Installing The Water Supply Line, You
Will Need:
• Basic Tools: adjustable wrench,
flat-blade screwdriver, and Phillips
TM
screwdriver
• Access to a household cold water line
with water pressure between 30 and
100 psi.
• A braided stainless steel water supply
line with integral fittings such as Smart
Choice® 5304437642 or ¼" copper line
with compression fittings. The line must
be 6˙ or longer to allow appliance to
be moved out for cleaning.
• A shutoff valve to connect the water
supply line to your household water
system. DO NOT use a self-piercing
type shutoff valve.
• Do not reuse compression fitting or use
thread seal tape.
• A compression nut and ferrule (sleeve)
for connecting a copper water supply
line to the water valve.
WARNING
To avoid electric shock, which can
cause death or severe personal injury,
disconnect the unit from electrical power
source before connecting a water supply
line to the appliance.
CAUTION
To Avoid Property Damage:
• Use Copper or Stainless Steel braided
tubing for the water supply line.
Electrolux does not recommend water
supply tubing made of ¼” plastic.
Plastic tubing greatly increases the
potential for water leaks, and the
manufacturer will not be responsible
for any damage if plastic tubing is
used for the supply line.
• DO NOT install water supply tubing
in areas where temperatures fall
below freezing.
NOTE
Ensure that your water supply line connec-
tions comply with all local plumbing codes.
Loading ...
Loading ...
Loading ...