Single Button Remote Control 3-Button Remote Control
Mini-Remote Control
SECURITY+
®
REMOTE CONTROLS
To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:
• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play
with remote controls.
• Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no
obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross
path of moving gate or door.
Press and hold the button
on the remote control
that you wish to operate
your door.
3
“click”
“click”
Release the
button when the
garage door
opener lights
blink or two
clicks are heard.
1
Locate the
Smart/Learn
button on
the garage
..renepo rood
2
Press and
immediately release
the learn button.
The learn LED will glow
steadily for 30 seconds.
Within 30 seconds...
PROGRAMMING THE REMOTE CONTROL
1
Press and hold the learn button
on garage door opener until the
learn LED goes out (approximately
6 seconds). All previous codes
are now erased.
For use with 390 MHz Security+
®
garage door openers and light controls that have an orange learn
button. The code between the remote control and the receiver changes with each use, randomly
accessing over a billion new codes.
NOTE: Your products may look different than the products illustrated in this manual.
TO CONTROL THE GARAGE DOOR OPENER LIGHTS
With the door closed,
press and hold
the remote
control button
that you want to
control the light.
L
K
C
O
LIGHT
Press and
hold the
light button
on the
door control.
1
+
L
K
C
O
LIGHT
Press and
hold the
lock button
on the
door control.
After the garage
door opener
lights flash,
release all
buttons.
+
2
3
“click”
“click”
This feature is only available on garage door openers equipped with a multi-function door control and a remote control with more than one button. Not available with universal receiver.
With Security+
®
remote controls, a remote control button can be programmed to operate the garage door opener lights without opening the door.
Reprogram each remote control you wish to use.
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
TO ERASE ALL CODES FROM MEMORY
To deactivate any unwanted remote control, first erase all codes:
Test by pressing the remote control button. The garage door opener lights should turn on or off but the door should not move.
Loading ...
Loading ...
Loading ...
