Loading ...
Loading ...
Loading ...
||
KEY, LOCKS AND ALARM
250
Reposition the rear side's shell and
press it down until a clicking sound can be
heard.
Then slide the shell back.
> A further click will indicate that the
shell is properly positioned and securely
attached.
Turn the remote control key over and
refit the front side's shell by pressing it
down until a clicking sound can be heard.
Then slide the shell back.
> A further click will indicate that the
shell is securely attached.
WARNING
Check that the battery is fitted correctly
with the correct polarity. If the remote con-
trol key shall not been used for a long time,
remove the battery to avoid battery leakage
and damage. Batteries with damage or
leaks may cause corrosive injury on contact
with the skin. Therefore, use protective
gloves when handling damaged batteries.
•
Keep batteries out of the reach of chil-
dren.
•
Do not leave batteries lying around
since they can be swallowed by chil-
dren or pets.
•
Batteries must not: be dismantled,
short-circuited or thrown into open
flames.
•
Do not charge non-rechargeable bat-
teries, this may cause an explosion.
Before use, the remote control key should
be checked to avoid causing damage. If
damage is discovered, e.g. if the battery
cover cannot be closed properly, then the
product should not be used. Keep defec-
tive products out of the reach of children.
IMPORTANT
Make sure that exhausted batteries are dis-
posed of in a manner which is kind to the
environment.
Loading ...
Loading ...
Loading ...