Loading ...
Loading ...
Loading ...
13
BURNER ADJUSTMENTS
LOW HEAT SETTING ADJUSTMENT:
NOTE:
THE LOW HEAT SETTING ON YOUR SIDE BURNER IS PRESET AT
THE FACTORY. ADJUST ONLY IF ALTITUDE OR ENVIRONMENTAL
FACTORS ARE CAUSING POOR, LOW HEAT, PERFORMANCE.
ADJUSTMENT STEPS:
1. Follow lighting instructions by setting the control
knob on “HI” and allow the burner to preheat for 5
minutes.
2. Turn the control knob to “LOW” and wait for the
burner temperature to drop and stabilize.
3. Attempting adjustment at any setting other than LOW can create a dangerous condition.
4. Remove knob by pulling straight away from control panel.
5. Insert a small blade screwdriver into the valve stem to begin the adjustment.
6. Turn counter-clockwise to INCREASE the low heat flame using pliers to hold the stem securely.
(see figure # 5)
7. Adjust the flames so the burner is fully lit around the perimeter when the knob is in the LOW posi-
tion. Once proper adjustment is reached, reattach the knob by pushing onto stem.
STAINLESS STEEL CARE:
Stainless Steel is widely used for catering and residential kitchen equipment because of its strength, its
ability to resist corrosion and its ease of cleaning. In fact, stainless steel ranks alongside glass and new
china in terms of “ease of cleaning” and in percentage removal of bacteria during washing.
As a result of these virtues, the metal is often taken for granted and it is assumed that no problems will
arise during its usage. However, some care is required to ensure that the stainless steel can live up to
this reputation.
DAY TO DAY CARE:
To maintain the original appearance of your ALFRESCO™ Side Burner, a regular cleaning routine
should be carried out using the following guidelines:
1. After use, following the safety precautions detailed on page 4 and 5, wipe the Side
Burner with a soft damp soapy cloth and rinse with clean water, preferably warm/hot
water. This should remove most substances encountered during the cooking process.
2. For more tenacious deposits, including oil, grease and water-borne deposits, use a multi
purpose cream cleanser and apply with a soft damp cloth. Rinsing with fresh water, as
described above, should follow as a last step.
Figure # 5
! WARNING
NEVER ADJUST THE BURNER SO LOW
THAT IT MAY GO OUT DURING USE. DO
NOT OPERATE THE GRILL WITH THE LOW
HEAT SCREW REMOVED.
GAS CAN ESCAPE AND CAUSE A
POTENTIALLY HAZARDOUS CONDITION.
! AVERTISSEMENT
NE JAMAIS AJUSTER LE BRÛLEUR SI BAS QU'IL
PEUT S'ÉTEINDRE PENDANT L'UTILISATION.
N'UTILISEZ PAS LE GRIL AVEC LA VIS À
CHALEUR BASSE RETIRÉE.
LE GAZ PEUT S'ÉCHAPPER ET PROVOQUER
UNE CONDITION POTENTIELLEMENT
DANGEREUSE.
Loading ...
Loading ...
Loading ...